impact load

In this paper, the ADAMS software is used to establish the model of concrete pump truck. The response of the arm frame is analyzed by different impact load.

使用ADAMS软件建立了混凝土泵车臂架系统的动力学仿真分析模型，对泵车臂架系统在不同峰值的油缸冲击载荷下的动态响应进行了详细分析。

By way of describing the mathematical model and analyzing the transient phenomena of active impact load in power systems, its real-time control methods are discussed.

本文从电力系统有功冲击负荷的数学模型和暂态过程着手，分析和探讨了有功冲击负荷实时控制的基本原理和方法。

Impact toughness and Micromechanism of 93w-ni-fe alloy in high speed impact load

高速冲击载荷下93W-Ni-Fe合金冲击韧性及微观机制

The design of var compensator is becoming more and more important due to increase in reactive load and nonlinear impact load in the electrical network.

因电网无功负荷的增加和大量非线性、冲击性负荷的使用，使无功补偿装置的设计变得越来越重要。

Dynamic Responses of Control Rods of Nuclear Ship under Impact Load

冲击载荷下核动力船只控制棒的动态响应研究

In this paper, a high-speed framing camera is used to seize the transient process of crack propagation. Under impact load, dynamic energy release rates of the running crack tip of a three-point-bend beam with initial crack are studied by means of dynamic caustics.

借助高速摄影捕捉裂纹瞬态扩展过程，利用动态焦散线研究了含有裂纹的三点弯曲梁在冲击载荷作用下扩展裂纹尖端的动态能量释放率分布规律；

On the other hand, as an instant impact load with controllable energy, dynamic compaction is a good test in-situ for the study of soil dynamics.

另外，作为一种能量可控的瞬态冲击荷载，强夯施工可以作为一个可控的土动力学原位试验。

The Automatic Frequency Control of Power System with Serious Impact Load

水火电联合跟踪冲击负荷的频率自动控制

Shock Absorption Analysis And Shock Absorber Design Under Impact Load

冲击载荷下的减震分析与设计

Steel tooth bit can increase the bit's stability and lower the tooth impact load, and enhance its wear resistance.

钢齿牙轮钻头增强了工作的平稳性，降低了牙齿的冲击载荷，使牙轮钻头的耐磨性能得到提高；

Study on theory and arithmetic of electric energy measurement for impact load

冲击负荷电能计量理论与算法研究

This high comprehensive mechanical property steel is aiming at the important structure received higher impact load and intensive vibration.

切削加工性能好，具有较高的综合力学性能，主要用于承受较大冲击载荷和振动的重要结构件。

Reducer, crank pin bearing so small and no reverse impact load that reducer tooth broken, crank pin fracture will not happen.

减速机、曲柄销受力小，无反向冲击负荷，减速机打齿、曲柄销折断的故障不会发生。

Analysis of caustics on dynamic energy release rate of running crack tip under impact load

冲击载荷下扩展裂纹尖端动态能量释放率分布的焦散线分析

Study of dynamic stress in a spur gear under impact load

冲击载荷作用下齿轮动应力的研究

This article discusses the dynamic computation of the closed cylindrical shell under impact load.

本文讨论闭合圆柱形壳体在冲击荷载作用下的动力计算.

Elasto-Plastic Dynamic Response of Stiffened Plates Under Low Velocity Impact Load

低速冲击载荷下加筋板弹塑动力响应分析

Influence of structural dynamic characteristic by concrete pump truck's impact load

混凝土泵车冲击载荷对结构动态特性的影响

Morphology and formation mechanism of white layer of annealed medium carbon steel under high energy impact load were estimated.

对退火45钢在高能冲击接触载荷下的白层形态及其形成机制进行了研究。

The jet loop reactor technology combines the advantages of both jet and loop flow, has the characteristics of high mass transfer efficiency, short hydraulic retention time, high volume loading and capacity of anti impact load etc.

喷射环流反应器结合了喷射与环流的技术优势，具有传质效率高、水力停留时间短、容积负荷高、抗冲击负荷能力强等特点。

Mechanical Analysis on Strain Based Design of Buried Pipeline Subject to Impact Load

冲击荷载作用下埋地管道基于应变的力学分析

The gear box of wind-driven generator is premature damage by impact load.

但是风力发电机的齿轮箱存在着经常在刹车时受冲击载荷而过早损坏的问题.

Approximate approach to instantaneous response of spring mass system under impact load

冲击载荷下弹簧质量系统瞬态响应的近似求法

Because of different characters of thermal load and impact load, the buckling phenomena of cylindrical shells are different.

然而，由于热载荷与机械载荷的特性不同，两种载荷单独作用或两者耦合下圆柱壳的屈曲形态有一定的差异性。

On the basis of this knowledge, accelerated life test of the valve under impact load has been completed on the built table.

在此基础上对溢流阀进行了在冲击载荷下的加速寿命试验。

Model test of hydrodynamic response of ships under impact load

船舶受冲击力作用时的水动力试验研究

In order to study the absorbing work of undercarriage under the impact load in the landing gear drop test, it is necessary to measure the dynamic values of three direction displacement of aircraft wheel in the twinkling of the aircraft landing.

为了研究飞机起落架受冲击载荷时的功量吸收状况，须在起落架落震试验中，对飞机着陆瞬间起落架机轮在空间三个方向上冲击位移的动态变化量进行测量。

In order to construct a theoretical model of human skull under impact load, the dynamic parameters of skull structure are tested and computed by finite element method.

为了深入探讨人头部受撞击时颅脑损伤的力学计算模型，本文对颅骨结构的功力参数连行了测试和有限元分析。

Pseudo static and energy conservation method are used to analyze the response of the structure under this kind of impact load.

应用拟静态和能量方法给出微结构在冲击载荷下的响应。

Low stress repeated impact load is ubiquitous in engineering.

低应力多冲载荷是工程中比较多见的载荷。